Cab SQUIX 6.3

The wide one
for Odette and UCC labels in applications in logistics

 

 

 Printing method

 Thermal transfer, Direct thermal

 Printable resolution dpi

 203 / 300 Dpi

 Print width up to mm

 203 dpi / 168 mm – 300 dpi / 162,6 mm

 Print speed  up to mm/s

 203 dpi / 250 mm/s – 300 dpi / 250 mm/s

 Ribbon / Ink side

 Outside or inside

 Ribbon / Variable length up to m

 450m

 Printer size and weights

 2312 x 288 x 460 mm

 Printer Weight kg

 14,0 kg

 Main storage (RAM) / Data storage (IFFS)

 256MB / 50MB

 Interfaces

 R232C, USB for PC connection, Ethernet, WLAN

 Power supply

 100 - 240 VAC, 50/60 Hz, PFC

 Printing method

 Thermal transfer, Direct thermal

 Printable resolution dpi

 203 / 300 Dpi

 Print width up to mm

 203 dpi / 168 mm – 300 dpi / 162,6 mm

 Print speed  up to mm/s

 203 dpi / 250 mm/s – 300 dpi / 250 mm/s

 Ribbon / Ink side

 Outside or inside

 Ribbon / Variable length up to m

 450m

 Printer size and weights

 2312 x 288 x 460 mm

 Printer Weight kg

 14,0 kg

 Main storage (RAM) / Data storage (IFFS)

 256MB / 50MB

 Interfaces

 R232C, USB for PC connection, Ethernet, WLAN

 Power supply

 100 - 240 VAC, 50/60 Hz, PFC

 

SQUIX technical detailsTechnical details

 

1- Hinged cover
The two-part cover made of impact-proof plastics folds when it is opened. Therefore, only little footprint is needed. The large panoramic window enables to check the material consumption and to track the full printing process.

 

2- Plungers
One plunger is fixed at the inner side. The second one is adjusted that far to the edge of the label until a good print image is ensured.

 

3- Rugged metal chassis
made of cast aluminum; basis to assemble all components

 

4- Peel-off function
Via the peel-off plate, the label is separated from the carrier material. Accurate imprint and dispense are achieved with the powered rewind assist roller and the pinch roller.

 

5- Periphery connection 
Additional modules are easy to connect. All peripheral devices are plugged to the printer with two pins and fixed with a screw.

 

6- Ribbon holder
Fast and easy exchange of the ribbon is enabled with the three-part tightening axles.

 

7- Roll holder
The spring-mounted margin stop with a screw cap enables constant tension during material feed and therefore improves accurate imprint. If rolls with 100 mm core diameter are processed, an adapter is recommended. 

 

8- Internal rewinder
Peel-off versions allow to rewind labels or carrier materials with or without a cardboard core. The three-part tightening axle provides easy material handling.

 

9- Rocker
When printing is started, the spring-mounted rocker with pulleys made of Teflon dampens the tension and therefore improves accurate imprint.

 

10- Material guide
It is mounted on the rocker. The stop is adjusted to the edge of the label with the rotary knob
.


 

Operation panel

 

Intuitive and easy operation with self-explanatory symbols to configure the device setups

 

Operation panel

1- LED signal: Power ON

 

2- Status bar: Data reception, Record data stream, Ribbon warning, SD memory card/USB memory stick plugged in, Bluetooth, WLAN, Ethernet, USB Slave, Time

 

3- Printer status: Ready, Pause, Number of printed labels per print job, Label in peel-off position, Awaiting external start signal

 

4-  Periphery buttons:

Periphery

Cutter/perforation cutter: direct cutting
External rewinder: winding outside or inside
Tear-off or peel-off mode: print the next label
Applicator: label application

 

 

5-  Operation

 

Jump  Jump to menu
 

Reprint  Reprint last label
 

Interrupt   Interrupt and continue print job
 

Stop  Stop and delete all print jobs
 

Label feed  Label feed
 

6- USB slot for the Service Key or a memory stick, to load data in the IFFS storage

 

7- USB-WLAN-Stick 2.4 GHz 802.11b/g/n included as an extra item in the scope of delivery;
In hotspot mode it is possible to directly connect a mobile device with the printer via WLAN.

 

 

SQUIX
Catalog English PDF


SQUIX
Operation Manuals English PDF


SQUIX
EU Declaration of Conformity EnglishPDF

 

cab Linux x86 - 32 Bit Driver
CUPS Linux Intel 32bit Driver (min. CUPS 1.2)


cab Linux x86 - 64 Bit Driver
CUPS Linux Intel/AMD 64bit Driver (min. CUPS 1.2)


cab MAC OS X Driver 
Apple® Mac OS X 10.6 up to 10.11


cab Windows Driver
32/64 Bit (Vista - Windows 7 - Windows 8 - Windows 8.1 - Windows 10 - Windows Server 2008, 2008 R2, 2012, 2012 R2, 2016) CERTIFIED


cablabel S3 Lite (Free)
Windows Vista, 7, 8, 10, Server 2008, 2008 R2, 2012, 2012 R2


cablabel S3 Pro
Windows Vista, 7, 8, 10, Server 2008, 2008 R2, 2012, 2012 R2


cablabel S3 Demo (Free)
Windows Vista, 7, 8, 10, Server 2008, 2008 R2, 2012, 2012 R2